How To Use Your uKeg Growler
1. INSTALL CO2 CARTRIDGE INTO GROWLER
- Ensure dial is in off position.
- Place CO2 into sleeve.
2. CHARGE CAP
- Tighten sleeve quickly and firmly.
3. FILL YOUR UKEG BEER GROWLER
- Rinse out with cold water.
- Fill from the bottom with fill-tube until lightly overflowing.
4. PUT CAP ON UKEG GROWLER
- Turn pressure to desired setting. (See here for beer pressure recommendations.)
5. POUR AND ENJOY
- Tilt beer glass, hold close to the spout.
- Open tap completely, let go.